The Beam Sections are arranged in one direction to create a linear ceiling effect, and are used to support the ceiling panels and light fittings.
Beams can be produced in a verity of width 75mm, 100mm, 150mm and tiles are generally supplied 254mm wide to standard length.
TECHNICAL DETAILS :
Panels:
Square edge 1264*254mm / 1200*300mm & Customized.
Beam:
75mm / 100mm / 150mm
Material:
Galvanized Steel 0.5mm / 0.45mm.
Paint Finish :
55 microns thick powder coating on exposed surface or 25 microns polyester coil coated over primer on visible surface with primer coat on rear side.
Suspension:
Height adjustment Spring Steel small Clip, 4mm dia Rod, GS Hold on Clamp & Panel clip, Pressure clip, GS / Aluminium Edge Profile.
METALIUM ARCHITECTURAL PRODUCTS
Office: 603, Silver Oaks, Mahalaxmi Cross, Road,
Paldi, Ahmedabad-380007, Gujarat, India.
Tel. : 079-26586166, 26582166
E-mail : admin@metalium.in
Plant: 3752/A, Phase-4, GIDC, Vatva,
Ahmedabad-382445, Gujarat, India.
E-mail : plant@metalium.in
Web : www.metalium.in
* * * * *
Source : Metalium Architectural Products (www.metalium.in)
Disclaimer : This tool does not provide any advice, It is intended for informational purposes only. It is not a substitute for professional advice. The content of this article if for information only, Information is gathered and shared from reputable sources; however, P. R. Communication (Ahmedabad Project Guide / Ahmedabad Business Guide / Gujarat Biz) is not responsible for errors or omissions in reporting or explanation. P. R. Communication (Ahmedabad Project Guide / Ahmedabad Business Guide / Gujarat Biz) gives no assurance or warranty regarding the accuracy, timeliness or applicability or the content. These articles available from a construction library are online sources of in-depth information.
Publisher : P. R. Communication (Ahmedabad Project Guide / Ahmedabad Business Guide / Gujarat Biz) www.ahmedabadbiz.blogspot.com
Post a Comment